Approved Method Optical and Electrical Measurements of AC-LED Packages and Arrays or Modules

$60.00

Member Price: 40$

ANSI/IES LM-88-18(R2023)
Document Type: Lighting Measurement and Testing (LM)

Available as a downloadable secure PDF only.

To stay current with all IES standards, we recommend subscribing to the The Lighting Library as an Individual or through your company as a Sustaining Member.

In stock

SKU: ANSI/IES LM-88-18(R2023) Category:

Product Description

Approved American National StandardLighting practitioners have found it difficult to obtain accurate optical and electrical characteristics of AC-LEDs at realistic elevated-temperature operating conditions.
Learn the procedures to be followed and precautions to be observed in performing optical and electrical measurements of AC-LEDs for total luminous flux, total radiant flux, total photon flux, color characteristics, electrical voltage, current, and power. This approved method applies to AC-LED packages, remote-phosphor AC-LED packages, AC-LED arrays or modules, and remote-phosphor AC-LED arrays or modules.

Page count: 12 pages
Publisher: Illuminating Engineering Society (2023)
SKU: ANSI/IES LM-88-18(R2023)
ISBN-13: 978-0-87995-361-4

Chapters:

  • 1.0 Introduction and Scope
    2.0 Normative References
    3.0 Definitions
    4.0 Optical Measurement Instruments
    5.0 Electrical Measurement Instruments
    6.0 Preparation for Measurements
    7.0 Method of Measurement under Single-Cycle AC Operation
    8.0 Method of Measurement under Continuous AC Operation
    9.0 Optical Measurements
    10.0 Test Report

Citation Format:
Illuminating Engineering Society. ANSI/IES LM-88-18(R2023), Approved Method Optical and Electrical Measurements of AC-LED Packages and Arrays or Modules. New York: IES; 2023.

CONTENTS

  • 1.0 Introduction and Scope
    • 1.1 Introduction
    • 1.2 Scope
  • 2.0 Normative References
    • 2.1 IES LM-85-14
    • 2.2 IES RP-16-17
  • 3.0 Definitions
    • 3.1 AC-LED
    • 3.2 AC-LED package
    • 3.3 AC-LED array or module
    • 3.4 device under test (DUT)
    • 3.5 remote-phosphor AC-LED package
    • 3.6 remote-ohosphor AC-LED array or module
    • 3.7 source measure unit (SMU)
    • 3.8 temperature-controlled mount (TCM)
  • 4.0 Optical Measurement Instruments
  • 5.0 Electrical Measurement Instruments
    • 5.1 Performance of Electrical Measurement Instruments
    • 5.2 Measurement Uncertainties of Electrical Measurement Instruments
  • 6.0 Preparation for Measurements
    • 6.1 Seasoning
    • 6.2 Operating Orientation
    • 6.3 Thermal Conditions
    • 6.3.1 Junction Temperature
    • 6.3.2 Ambient Air Temperature
    • 6.4 Airflow
    • 6.5 Humidity
  • 7.0 Method of Measurement under Single-Cycle AC Operation
    • 7.1 General
    • 7.2 Measurement Procedure
    • 7.3 Estimation of the Measurement Uncertainty
  • 8.0 Method of Measurement under Continuous AC Operation
    • 8.1 General
    • 8.2 Measurement Procedure
    • 8.3 Methods Used to Determine the Initial Reference Current, IF(0)
    • 8.3.1 R MS Initial Reference Current, IF(0)rms
    • 8.3.2 Instantaneous Initial Reference Current, IF(0)ins
    • 8.4 Estimation of the Measurement Uncertainty Due to Junction Temperature Rise
  • 9.0 Optical Measurements
  • 10.0 Test Report
    • 10.1 General Information
    • 10.2 Description of DUT
    • 10.3 Description of Measurement System
    • 10.4 Environmental Conditions
    • 10.5 Measurement Conditions
    • 10.6 Description of Measurement
    • 10.7 Optical Quantities (Time-Averaged) (Typical)
    • 10.8 Electrical Quantities (Typical)